PRS-3201B energy storage coordinated controller can collect voltage, current and frequency data independently, and provides functions of AGC/AVC control, dynamic reactive power regulation, primary frequency modulation, interaction among power supply, power grid, loads and energy storage. It has msec-level control of up to 128 PCSs through GOOSE protocol.
Energy Storage Coordinated Controller
he product can be applied to frequency modulation and black start of large independent energy storage power stations, supporting energy storage stations of new energy systems, and thermal power and energy storage stations.
Product Overview
Product advantages
-
01
Based on CYG ET’s mature shelf technology of protection control platform, the maturity and reliability of the platform have been fully verified by the operation of protection measurement and control devices in thousands of intelligent substations. -
02
The control network is independent of the monitoring network. The control network employs the IEC-61850/GOOSE multicast communication protocol, enabling the msec-level real-time dynamic response control of microgrids. -
03
I IEC-61850-8-1/MMS protocol is supported between the uplink and EMS master station, and the interoperability requirements are met. -
04
The plug-in hardware design and modular software design based on general bus backplane technology facilitate function expansion. -
05
The control network supports dual-network redundancy configuration to further improve reliability. -
06
A number of time synchronization modes are supported, such as IRIG-B, IEEE 1588V2, and SNTP time synchronization.
Technical parameters
Environmental parameters | |
Parameter | Index |
Normal operating temperature | -40℃～+70℃ |
Maximum change rate of ambient temperature | 1℃/min |
Relative humidity | 5%～l00% |
Maximum absolute humidity | 35g/m³ |
Atmospheric pressure | 70kPa～106kPa |
Altitude | <6000m |
Rated electrical parameters | |
Parameter | Index |
Frequency | 50Hz |
Nominal value of voltage input | 690/380V/100V (line voltage) |
Nominal value of current input | 5A/1A |
DC power supply | 220V/110V |
AC power supply | 220V |
Power consumption | AC voltage circuit:<0.25VA/phase |
AC current circuit:<0.25VA/phase | |
Overload capacity | AC voltage: 2 times rated voltage, continuous operation; |
AC current: 2 times rated current, continuous operation; | |
20 times rated current for 1s | |