Relying on years of rich technical experience of CYG Sunri in the charging field, CYG ET continuously innovates technology and forms a complete charging product series against various problems in the rapid development of the electric vehicle charging market.
Liquid-Cooling High-Power DC Charger
Liquid-cooling high-power DC charger can be applied in bus hubs, large and medium-sized charging stations and other occasions that need to provide high power and fast charging
Product Overview
Product advantages
-
Intelligent status display
Charging status information and vehicle parameter information are collected and displayed in real time, and the visual charging process is more reassuring -
High protection, wide temperature range
Protection level IP55, stable operation in wide temperature range from -30℃ to 55℃, expanded adaptability of equipment -
Low noise pollution
Centralized design is adopted in the rectifier part, which can effectively control noise source -
Low standby power loss
The average power consumption of each charging interface is less than 35W, and the daily power consumption is only 0.8kWh -
Constant power range
The whole pile has a constant power range of 300-1000V, and the voltage range covers all vehicle models in the market -
High current
For a single charger, the maximum current is 1000A, and the rated current is 600A -
High utilization rate
Multiple terminals share power, which ensures high utilization rate of system capacity -
Easy maintenance
Low investment cost, small floor area, easy installation and easy capacity expansion -
Good compatibility
Hardware and software compatible with GB/T & ChaoJi
Technical parameters
Item | Index |
Operating temperature | -30～55℃ |
Protection level | IP55 |
AC input voltag | 380V: 304~456 (three-phase five-wire system) |
AC input frequency | 50Hz：47～63 |
Output voltage range | 200V～1000V |
Maximum output power | 600KW |
Charging mode | Free power distribution of single-charger charging and multiple-charger charging |
Power factor | ≥0.999 |
Input total harmonic | ≤5% (Class-A equipment) |
Overall efficiency | ≥94% |
Standby power loss | ≤100 W |
Noise | ≤65 dB |
Startup mode | Direct start/start with password/start by swiping card/start by scanning QR code |
Billing mode | Support IC card, CPU card, online payment, etc. |
Number of terminals | 4 terminals |
Reference dimensions of rectifier cabinet (height * width * depth) | 2100*1450*850mm |
Reference dimensions of split piles (height * width * depth) | 2020*500*500mm |