Relying on years of rich technical experience of CYG Sunri in the charging field, CYG ET continuously innovates technology and forms a complete charging product series against various problems in the rapid development of the electric vehicle charging market.
DC/AC Charging Piles for Electric Vehicles
The DC charging pile is mainly used for fast charging of electric vehicles, and the charging power can be configured as required by the customer; charging piles can be used in scenarios such as bus hubs, expressways, large and medium-sized charging stations and parking lots in business districts where fast charging services are provided.
AC charging piles are divided into wall-mounted and floor-mounted charging piles, which provide AC charging services for electric vehicles and are widely used in various ground and underground parking lots in residential areas and shopping malls.
AC charging piles are divided into wall-mounted and floor-mounted charging piles, which provide AC charging services for electric vehicles and are widely used in various ground and underground parking lots in residential areas and shopping malls.
Product Overview
Product advantages
-
DC charger
(1) Intelligent status display. Charging status information and vehicle parameter information are collected and displayed in real time, and the visual charging process is more reassuring;
(2) High protection and wide temperature range: protection level IP55, stable operation in wide temperature range from -30℃ to 55℃, expanded adaptability of equipment;
(3) Low standby power loss: the average power consumption of each charging interface is less than 35W, and the daily power consumption is only 0.8kWh;
(4) Constant power range: the constant power range of the whole pile is 300V~750V, and the voltage range covers all large and small vehicle models in the market;
(5) Double cabin structure: the isolation of devices and modules provides system reliability and prolongs electrical life;
(6) Independent air duct for charging module: the module dissipates heat faster, which can effectively improve the electrical service life of the charging module;
(7) Front door design: there are no openings on the back of the cabinet, and the cabinet can be installed directly against the wall to meet various installation requirements on site. -
AC charging pile
(1) Fashionable appearance: simple and elegant, made of metal plate, durable and safe;
(2) Intelligent status display. Charging status information and vehicle parameter information are collected and displayed in real time, and the visual charging process is more reassuring;
(3) Safe and reliable: IP55 protection level, and can be used in harsh outdoor environment;
(4) Multiple protection: protection functions such as undervoltage protection, overvoltage protection, overcurrent protection, leakage protection, short circuit protection and lightning protection;
(5) Low standby power loss: the daily power consumption is less than 0.2kWh, energy saving and highly efficient.
Technical parameters
Technical parameters of DC chargers:
Item | Index | ||
Operating temperature | -30～55℃ | ||
Protection level | IP55 | ||
AC input voltage | 380V: 304~456 (three-phase five-wire system) | ||
AC input frequency | 50Hz：47～63 | ||
Output voltage range | 200 V～1000V | ||
Constant power voltage range | 300 V～1000V | ||
Maximum output power | 180 kW (single charger) | ||
Charging mode | Free power distribution of single-charger charging, double-charger equalized charging/rotary charging | ||
Power factor | ≥0.999 | ||
Input total harmonic | ≤5% (Class-A equipment) | ||
Overall efficiency | ≥95% | ||
Standby power loss | ≤30 W | ||
Noise | ≤60 dB | ||
Startup mode | Direct start/start with password/start by swiping card/start by scanning QR code | ||
Billing mode | Support IC card, CPU card, online payment, etc. | ||
Power model | 30～80KW | 90～160KW | 150～240KW |
Reference dimensions of cabinet (height * width * depth) | 1630*600*400mm | 1730*700*500mm | 1800*750*600mm |
Technical parameters of AC charging pile:
Item | Index | |
Structure and type | Wall-mounted | Floor-mounted |
Typical power | 3.5kW/7kW | 21kW/42kW/84KW |
Input voltage | AC220V：176～264 | AC380V：304～456 |
Input frequency | 50Hz：47～63 | 50Hz：47～63 |
Rated current | 16A/32A | 16A/32A/63A |
Operating temperature | -35℃～55℃ | |
Operating humidity | ≤95% | |
Protection level | IP55 | |
Standby power loss | < 10 W | |
Leakage protection | ≤30mA | |
Optional configuration | Floor-mounting bracket, screen, card reader, wireless communication module, electric meter | Screen, card reader, wireless communication module |
Electric meter | ||
Startup mod | Start by plugging in charger/start with password/start by swiping card/start by scanning QR code | |
Billing mode | Support IC card/M1 card/app/WeChat official account | |